Auto-zone-control-systems IP Module Kit Installation Guide for the IP Module Instrukcja Użytkownika Pobierz pdf (Strona 18)

IP MODULE

Technical Guide

CommLink 5 LED Descriptions

Figure 19: CommLink 5 LED Display

CommLink 5 LED Descriptions

USB LEDs

LOOP - Indicates communication activity on local controller

network. This LED ﬂ ickers when data is exchanged with

the controller network.

TX-USB - Indicates transmitted data status of USB

connection. This LED only ﬂ ashes when your CommLink 5

is connected to a computer and data is sent to Prism 2 from

the CommLink 5 via USB.

RX-USB - Indicates received data status of USB connection.

This LED only ﬂ ashes when your CommLink 5 is

connected to a computer and data is sent from Prism 2 to

the CommLink 5 via USB.

COMP- Indicates connection to your computer. This LED

will turn on solid once you plug the USB cable into your

computer as long as the connection is not lost.

NETWORK LEDs

ACT-LAN - Indicates activity on the local area network. This

LED ﬂ ashes on when LAN is transmitting and receiving

data and is only operational with an Ethernet connection.

LNK-LAN - Indicates local area network is connected. This

LED is on when connected to LAN and is only operational

with an Ethernet connection.

WLAN - Indicates wireless connection to the local area

network. This LED ﬂ ashes on when LAN is transmitting

and receiving data and is only operational with an Ethernet

connection.

1 2 ... 13 14 15 16 17 18 19 20

Brak uwag

Auto-zone-control-systems IP Module Kit Installation Guide for the IP Module Instrukcja Użytkownika Strona 18