Auto-zone-control-systems USB-Link 2 Technical Guide, Installation Instructi Instrukcja Użytkownika

USB-Link 2 Technical Guidewww.wattmaster.comUSB-Link 2 Code: SS0073 Version 4.11 and up

USB-Link 2 10Technical Guide Communication Settings and LED Descriptions Figure 3: USB-Link 2 Confi guration Switch, Communication Speed S

USB-Link 211Technical Guide TroubleshootingTroubleshooting TipsProblems with Prism 2 Software• Verify that the

USB-Link 2 12Technical Guide 4. To assign a port number less than 10, click on<Advanced>. The Advanced Settings Windowwill appear.5

USB-Link 213Technical Guide Troubleshooting EPROM SoftwareVerifying CommLink II, CommLink III, and MiniLink EP

USB-Link 2 14Technical Guide Troubleshooting EPROM Software

USB-Link 215Technical Guide Notes

Form: WM-USBLII-TGD-01E Printed in the USA October 2014 All rights reserved. Copyright 2014 W

USB-Link 21Technical Guide USB Serial Converter and Serial Port Driver InstallationThe internal USB communicat

USB-Link 2 2Technical Guide Finding What COM Port Number the USB-Link 2 is Using 1. Left-click on <Start>, located on the bottom l

USB-Link 23Technical Guide 4. To assign a port number less than 10, click on<Advanced>. The Advanced Set

Table of ContentsWattMaster Controls, Inc.8500 NW River Park Drive · Parkville, MO 64152Toll Free Phone: 866-918-1100PH: (816) 505-1100 · FAX: (816)

USB-Link 23Technical Guide USB-Link 2 OverviewThe USB-Link 2 (OE366) is a portable device that is used as an in

USB-Link 2 4Technical Guide Important Notes  Follow the included USB-Link 2 driver installation instructions (page 5).  Follow the

USB-Link 25Technical Guide USB Serial Converter and Serial Port Driver InstallationThe internal USB communicat

USB-Link 2 6Technical Guide Connection and Wiring Figure 2: USB-Link 2 Connection & Wiring AdapterSupplied With USB-Link 2PL101904Ada

USB-Link 27Technical Guide Finding What COM Port Number the USB-Link 2 is Using 1. Left-click on <Start>

USB-Link 2 8Technical Guide Prism 2 Setup InstructionsConfi guring Prism 2 for the USB-Link 21. Insert your Prism 2 software CD and follo

USB-Link 29Technical Guide 12. From the <Communications> menu on the main toolbar, select <Search for